All cadjunkie tutorials

How to browse

This page lists every published lesson on cadjunkie in one place. There are two good ways to use it.

If you already know which program you want to learn, go to its hub: SolidWorks, Rhino, modo, Onshape, or Maker projects if your goal is a printed part or an electronics housing. Each hub explains where to start and what order to follow.

If your question is about form rather than software, such as why a surface looks lumpy or how to blend two shapes smoothly, start with the surfacing lessons. On this site, surfacing means building and controlling smooth free-form surfaces: how they are defined, how they meet each other, and how to check their quality. The ideas carry across every CAD program, even though the commands differ.

How this library is organized

Lessons are grouped by tool below. A series such as Rhino Basics is listed in the order it is meant to be followed, while standalone lessons such as Tip O' the Horn and FeatureScript 101 can be read on their own. Every lesson is written for current software, and new lessons will be added to this list as they are published. Nothing listed here is a placeholder; every link goes to a complete lesson.

Rhino

The Rhino Basics series is the largest course on the site. Start with the series index and follow the weeks in order. Tip O' the Horn 001 is a standalone lesson on analyzing surfaces with display modes.

Onshape

FeatureScript 101 teaches you to write your own custom Onshape features, starting from a simple cube and ending with a hex nut that offers a dropdown of standard metric sizes.

Maker projects

Rhino Basics week 05 and week 06 together make a complete small project: a design brief for an object driven by simple electronics, then accurate models of the board and motor and a first housing around them.

SolidWorks

SolidWorks lessons are being written now, starting with a beginner tutorial. They will appear in this list when they are published.

Cross-tool

A tool-neutral guide to surfacing techniques is in progress. Until it is ready, week 04 of Rhino Basics is the best introduction on the site to curve degree, curvature, and primary and secondary surfaces.

modo

The modo hub explains where modo fits in product design and points to related lessons in other programs. New modo lessons may follow later.

All published lessons

The complete list of published lessons:

To learn more about the site, see the About page, or go back to the homepage.